CompTIA Network+ Simulation 13

You have been tasked with setting up a wireless network in an office. The network will consist of 3 access points and a single switch. The network must meet the following parameters.

The SSIDs need to be configured as corpnet with a key of S3cr3t! The wireless signals should not interfere with each other.

The subnet the Access points and Switch are on should only support 30 devices maximum The access Points should be configured to only support TKIP clients at a maximum speed

Instructions: Click on the devices to review their information and adjust the setting of the APs to meet the given requirements.

Correct Answer:

Exhibit 1 as follows
Access Point Name: AP1
IP Address: 192.168.1.3
Gateway: 192.168.1.2
SSID: corpnet
SSID Broadcast: yes
Mode: G
Channel: 1
Speed: Auto
Duplex: Auto
WPA Passphrase: S3cr3t!

Exhibit 2 as follows
Access Point Name: AP2
IP Address: 192.168.1.4
Gateway: 192.168.1.2
SSID: corpnet
SSID Broadcast: yes
Mode: G
Channel: 6
Speed: Auto
Duplex: Auto
WPA Passphrase: S3cr3t!

Exhibit 3 as follows
Access Point Name: AP3
IP Address: 192.168.1.5
Gateway: 192.168.1.2
SSID: corpnet
SSID Broadcast: yes
Mode: G
Channel: 11
Speed: Auto
Duplex: Auto
WPA Passphrase: S3cr3t!